Welcome to the Thornlea NoCO2 Project Site

Welcome to the official website for the Thornlea Secondary School, NoCO2 Launcher Project. For first time visitors, please start from the bottom of the blog and read your way up, doing so will allow you to read "up" to where we are today. There is also a convenient Archive of posts on the right sidebar under "Blog Archive". There are options to subscribe to the blog at the bottom of the page.


Monday, September 2, 2013

Project Update August 16, 2013

A couple things have happened since I've posted the Relay16 code.

First, I'm back on track after successfully sourcing a 1/4 x 1/4 shank router bit after the last one broke. therefore I can get back to working on the enclosure.

Secondly, my Alex was unable to get the GPIO32 working. If ANYONE would like to take the RELAY16 code and add a section for the GPIO32 for this project. OR even write a whole new program for it (agreeing to release it open source), I am open to that idea and almost anything you can come up with at this point. You can download the user's manuals for the boards at the following links:

RELAY16 Manual: http://numato.com/productdoc/usbrelay16/usbrelay16.pdf

GPIO32 Manual: http://numato.com/productdoc/usbgpio32/usbio32dv1.pdf

Additional information can be found on these boards at the following web addresses:

RELAY16: http://numato.com/16-channel-usb-relay-module

GPIO32: http://numato.com/32-channel-usb-gpio-module

If you have any questions, you can e-mail me at cal920prod@gmail.com, or message me on Facebook: Facebook.com/cal920c, or Tweet me @cal920c (tag modelcarlauncher.blogspot.com in the tweet, and we'll make a dialogue). I have very limited experience in programming, but anything you send me will be opened and inspected by a trusted (on my end) third party to get a second opinion, and tested before it's posted on the blog.

No comments:

Post a Comment